iVox USB & Optical & Coaxial & BNC Input DAC Headphone Amp 24bIT/192kHZ BOARD

More Views

iVox USB & Optical & Coaxial & BNC Input DAC Headphone Amp 24bIT/192kHZ BOARD

Be the first to review this product

V3 can input RCA coaxial, BNC coaxial, fiber optic signal, supports a wide 16bit-24bit, 32kHz-192kHz;
V3 can connect the computer to become a good external USB sound card, USB supported range of up to 24bit/96kHz, through the drive can support ASIO;
In addition, V3 also take into account the AUX input, can be used as pure amp or preamp to use;
CS8416 + CS4398 + OPA2134 full HIFI devices finely tuned to get the perfect sound;
Amp output voltage swing of up to 19.2 volts, easily drive 600 ohm impedance headphones

$39.99

Availability: In stock

Details

iVox V3 Decoder USB Optical Coaxial BNC DAC

 

Descriptions:

V3 can input RCA coaxial, BNC coaxial, fiber optic signal, supports a wide 16bit-24bit, 32kHz-192kHz;
V3 can connect the computer to become a good external USB sound card, USB supported range of up to 24bit/96kHz, through the drive can support ASIO;
In addition, V3 also take into account the AUX input, can be used as pure amp or preamp to use;
CS8416 + CS4398 + OPA2134 full HIFI devices finely tuned to get the perfect sound;
Amp output voltage swing of up to 19.2 volts, easily drive 600 ohm impedance headphones;

 

V3 features:
1.the whole band minimum distortion of only 0.0005%, which is more than ten million class professional audio test instrument measured
2. coaxial decoder, fiber optic decoder, external USB sound card, amp, pre-integrated design, a machine can solve the majority of users HIFI needs;
3. using the Cirrus Logic CS8416 coaxial receivers with top decoder CS4398 combination, to achieve 16bit-24bit, 32kHz-192kHz full support;
4. Use "SOLO" headphone amplifier circuit, the output swing high, regardless of driving high impedance headphones or as a pre-use are adequate;
5. full intelligent control, display, with only two buttons you can control all functions;
6. USB interface, using Taiwan's TE7022L TENOR program supports up to 24bit/96kHz, more can be achieved with the driver ASIO.
7. abandon the traditional mechanical switches, the introduction of FET switch for the machine to reduce the internal resistance of the power supply while avoiding the circuitous routing;
8.sound mute switch circuitry, maximizing the impact of reducing the switching machine sound;
9. is widely recognized quality devices using fans to create the best quality and performance, such as: Japan, KOA resistors, Germany WIMA capacitors, Germany's Siemens capacitors, Japanese capacitors ...... nichicon Audiophile.
10.4 LED instructions respectively four kinds of digital input while flashing to indicate the conventional Unlock instructions.
13. As the built-in MCU control, intelligent machine operation / display, two small button you can control all functions.
14. rich input and output interface. Extensive use gold-plated interface to ensure smooth signal transmission.

 

Overall parameters
Analog audio inputs: RCA * 1
Digital audio input interface USB + Fiber + RCA + BNC Coaxial Coaxial
Block 6.35mm headphone amp output interface
Sample median 16-24bit
Sampling frequency 32-192kHz (USB up to 96kHz)
Single Weight Approximately 588g
Dimensions (including protruding parts) 10CM * 16CM

Amp parameters
Range of 16-600O load impedance
Maximum output power 165mW (RL = 32O, THD + N = 1%)
110mW (RL = 300O, THD + N = 1%)
70mW (RL = 600O, THD + N = 1%)
Minimum Distortion 0.0007% (RL = 32O, Pout = 50mW)
Typical Distortion (@ 1kHz) 0.0032% (RL = 32O, Pout = 50mW)
4-32kHz frequency response range
Frequency response flatness 0.04dB (20-20kHz)
Input Sensitivity 2.3Vrms
Noise floor <10µV
Gain (@ 1kHz) 9dB
110dB SNR
19.2V output voltage swing

Decoder parameters
Line Out Output Level 2.38Vrms @ 1kHz
Minimum distortion 0.00050% (sampling frequency 96kHz)
Typical Distortion (@ 1kHz) 0.00082% (sampling frequency 96kHz)
Dynamic range 117dB (sampling frequency 96kHz)
Frequency response flatness 0.04dB (20-20kHz)
Background noise <5µV (20-20kHz)
114dB SNR
Static power consumption of about 3.3W
Maximum sampling rate 96kHz USB interface
Optical fiber, coaxial maximum sampling rate 192kHz

Customer Reviews

Write Your Own Review

You're reviewing: iVox USB & Optical & Coaxial & BNC Input DAC Headphone Amp 24bIT/192kHZ BOARD

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

iVox USB & Optical & Coaxial & BNC Input DAC Headphone Amp 24bIT/192kHZ BOARD

USD

$39.99

0